A quotation request form can be Found at the Bottom of the Page
Curved Bullet Resistant Vehicle Glass
Curved Bullet Resistant Vehicle Glass is a glass-clad polycarbonate multi-ply composite laminate combing polycarbonate and glass using special polyurethane high adhesion bonding interlayers which allow the expansion / contraction differential of both materials. Our Protective Glass systems are directly interchangeable with OEM (Original Equipment Manufacturer) parts. Our Curved Bullet Resistant Glass meets standards set by: (ANSI) American National Standards Institute, (SAE) the Society of Automotive Engineers (DOT) Department of Transportation, and (ASTM) American Standard Testing Materials. Ballistic testing provided by: H.P.White Laboratories Inc. Our Curved Bullet Resistant Vehicle Glass is only sold as a full vehicle set. We do offer single replacement units for existing armored vehicles.
We have protection levels from .22 Handguns to Armor Piercing Assault Rifle rounds. Our most common level sold is AUTO-3 ( See chart below)
Pricing and sales are limited to 2011 to 2019 year vehicles years only! Sorry No Exceptions .
Bullet Resistant Glass for Vehicles: Glass -Clad Polycarbonate
14 MM 9/16″
25.2 Kg/m2 5.3 Lbs. Sq. Ft.
.9mm,.357 Magnum Handguns and lesser threats.
22 MM 7/8″
46.6 Kg/m2 8.8 Lbs. Sq. Ft.
9mm,.357,.44 Magnum Handguns and lesser threats.
39 MM 1-1/2″
88 Kg/m2 18 Lbs. Sq. Ft.
5.56×45 [SS 109], 7.62×39 MSC, 7.62×51 FMJ and lesser threats.
42 MM 1-5/8″
94 Kg/m2 18.5 Lbs. Sq. Ft.
Multi hit 7.62 x 51 FMJ and lesser threats.
57 MM 2-1/4″
130 Kg/m2 27 Lbs. Sq. Ft.
.30-06 AP and lesser threats.
78 MM 3-3/16″
180 Kg/m2 34 Lbs. Sq. Ft.
7.62×51 AP and lesser threats.
Installing a set of Curved Bullet Resistant Vehicle Glass is a start! You should also consider some type of Armor Panels for the doors and side wall. Or a complete Vehicle Armor Kit ( Handgun protection only)
Please note: specifications and information listed on this page are subject to change without notice.
Pricing and sales are limited to 2011 to 2019 year vehicles years only! Sorry No Exceptions. And PLEASE Serious Requests Only!
A few things to consider before requesting a price quotation:
*Pricing starts at around $9,000 for a small sized 2 door vehicle. *Modifications are needed to the vehicle doors. *Is your vehicle a good fit to install Curved Bullet Resistant Vehicle Glass? *Do you have a need to own a vehicle with Bullet Resistant Glass? *Are you serious or just curious? Serious: YES! proceed Curious NO!
Please Note: Some vehicles are not well suited for the installation of our Curved Bullet Resistant Vehicle Glass, such as small compact cars: Like the Chevrolet Camaro, Corvette, Dodge Viper, Ford Mustang, Pontiac Trans-Am and any convertible top vehicle. Vehicles that are well suited for our Vehicle Glass are: Chevrolet Suburban, Toyota Landcruiser, Pick up trucks, or other such heavy-duty 4 wheel drive vehicles. We may not be able to provide a price quotation for all requests. We may also require a phone call from you before a price quotation will be provided.
In these dangerous times, as you can understand we receive quite a few quotation requests for our Curved Bullet Resistant Vehicle GlassUnfortunately, we also receive frivolous quotation requests . We are NOT interested in responding to these types of requests. We are in business to help customers with a serious need for products. Please feel free to call us if you have questions on our policy 513- 281-6700 9:AM to 5:PM M-F EST.
All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales: We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited. You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions Using a credit card for payment does not absolve you from following our terms and conditions of sale.
Please DO NOT submit a request you are not serious!