Spectra Shield Armor Panels
Spectra Shield Armor Panels© 50″x63″are the strongest, lightest, composite ballistic material made today! Spectra Shield Armor Panels isn’t a woven fabric like most ballistic materials, but is rather a thin, flexible ballistic composite made from two layers of unidirectional fibers held in place by flexible resins. These fibers are arranged so they cross each other at 0 and 90 degree angles, then, both fiber and resin layers are sealed between two thin sheets of polyethylene film similar to sarran wrap. Spectra Shield is ten times stronger than steel. We can also provide Spectra Shield Armor Ballistic Panels in other sizes, please contact us for more information. Ballistic Protection up to NIJ Level III+.
Spectra Shield Armor Panels are very lightweight and waterproof. Some ideal armor applications include vehicle armoring, helicopters, aircraft, and marine use such as boats, ships, border patrol and homeland security vessels. We can custom fabricate and cut our Spectra Shield Panels to your exact specifications. We have state of the art water capabilities, send use your CAD files and we will do the rest. We can custom manufacture Spectra Shield Armor Panel kits for boats, ships, vehicles or other such applications. The cut panels can be shipped to your location ready for easy installation. Call us today for more information at 513-281-6700.
Spectra Shield composite armor panels can be glued in place, or installed with screws, nuts and bolts, etc.
All of our Armor Panels are made in the USA.
Please note: specifications and information listed on this page are subject to change without notice.
| Spectra Shield Armor Panels 63″x 50″ | |||
| Threat | Level of Protection | Thickness | Lbs. per Sq. Ft. |
.9mm, .357,& ,.44 Magnum Handguns and lesser threats | N.I.J. IIIA CEN B-4 | 7/32″ | 1.0 Lbs. |
.5.56mm 55 gr., 30 cal 180 gr.,308 NATO 150 gr. FMJ and lesser threats | N.I.J. III CEN B-6 | .0.75″ | 3.75 Lbs. |
| AK-47 7.62×39 sc M1943 MSC and lesser threats | N.I.J. III+ | 0.95″ | 3.9 Lbs. |
| 5.56 M855 and lesser threats | N.I.J. III+ | 1-1/2″ | 6.00 Lbs |
Get a Quote
or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
Using a credit card for payment does not absolve you from following our terms and conditions of sale.
FLEX-PRO 50″x41″ to 50″X96″ Thermoformable Vehicle Armor Panels are a laminated composite armor fabricated from a vulcanized urethane 3000 denier aramid composite. FLEX-PRO armor panels are semi-rigid, and have excellent multi-hit capabilities and will not bunch up or fall down during ballistic incidents or severe vehicle use. Flex-Pro Ballistic Panels are thermoformable, with the use of a heat gun these panels can be formed and bent into complex shapes and will retain these shapes.
Dyneema 50″x63″ Armor Panels are the strongest, lightest, composite ballistic material made today! Dyneema isn’t a woven fabric like most ballistic materials but is instead a thin, flexible ballistic composite made from two layers of unidirectional fibers held in place by flexible resins. These fibers are arranged so they cross each other at 0 and 90 degree angles, then, both fiber and resin layers are sealed between two thin sheets of polyethylene film similar to sarran wrap. Ballistic Protection up to NIJ Level III+.
Our Fiberglass Ballistic Armor panels are manufactured using multiple layers of fiberglass cloth or woven roving that are bonded together with a preimpregnated resin under heat and pressure to form a ridged bullet resistant/bulletproof Panel. This is the same fiberglass that boats are made from, only with many more layers of the fiberglass cloth used in the process.
Our composite armor panels find extensive use in the automotive armor industry. Kevlar Armor Panels, Flex-Pro Thermoformable Armor Panels, Dyneema, and Spectra Shield Ballistic Panels are well suited for this type of application where lightweight ballistic protection is needed. These bulletproof panels are durable, very lightweight and simple to install. In vehicle armoring you add additional weight to the vehicle, so when using these composite ballistic panels added weight is kept to the absolute minimum. Not only will they extend the life of your vehicle’s brakes and suspension, they also reduce maintenance costs and improve overall vehicle performance. No special tools are need for cutting or installation. A disadvantage is that they are not well suited for 
Our Steel Armor Plate finds extensive use in the automotive armor industry when you need to protect the vehicle from armor piercing rounds, attacks from IED’s, blast mitigation, and fragmentation threats. Used for the vehicle floor, roof, fire wall, doors and side walls, we provide the following grades: AR 500, MIL-A-46100, MIL-A-12560 Class 1 and 2, MIL-A-46177, from 1/8″ to 1-1/2″ for handgun threats and up to .50 caliber armor piercing rounds, depending on the product.
For the hardening of government buildings, court houses, schools, banks, military installations, nuclear power plants and residential safe room construction. Our Steel Armor Plate and Fiberglass Ballistic Armor Panels would be the most cost effective products for this application, due to their low cost and superior ballistic protection. These panels also add strength and stability, especially if your need is for the added protection from bomb blasts or heavy assault rifle attacks. Our Kevlar Armor Panels, Flex-Pro thermoformable Armor Panels, in a standalone lay up work well for curved applications, such as judge’s benches, speaker podiums, or desks. Dyneema and Spectra Shield Ballistic Panels are also well suited for when lightweight ballistic protection is needed for assault rifle protection. Typically, their use in such applications would be limited to special situations, due to the higher cost, limited sizes, and thickness. 
Factory Direct Pricing