Author: Dave Applegate

    31 May

    Bullet Resistant Chest Plates

    Polyethylene Ballistic Plate

    Polyethylene Ballistic Plate

    NIJ Threat Level III
    Single Curve

    An ultra-light rifle plate, the PBP provide excellent protection against high velocity rounds. The PBP is well suited for water (salt water) environments as well as conditions involving heavy vibration. Although this plate is rated NIJ Threat Level III, additional support with a level III-A vest is needed for semi-armor piercing rounds. Protect yourself from high velocity rounds with this incredibly comfortable and ultra-light hard armor plate.

    STANDARD FEATURES:
    NIJ Threat level III
    Single curve
    Multi-hit capability
    Front/Back placement

    Size: 10″x12″ [25×30 cm]
    Weight: 3.08 Lbs. [2.2 Kg]
    Thickness: .70″ [1.8Cm]

     

    Titanium / Steel Multi-Hit AK-47 Hard Armor Plate

    Titanium / Steel Multi-Hit AK-47 Hard Armor Plate

    NIJ Threat Level III

    Bulldog Direct’s Titanium/Steel plates (in conjunction with a Level IIIA Vest) are capable of stopping multiple hits from 7.62mm X 51 mm (.308 caliber) FMJ and lesser threats such as AK-47/Kalashnikov 7.62 X 39 mm (FMJ). With such protection and at 30% less the weight than our competitors steel hard armor plates, our Titanium/Steel Hard Armor Plates are the best valued hard armor plates on the market today. Our Titanium/Steel combination Hard Armor Plates provide all the protection you will find in Threat Level III steel plates, but at about 30% less the weight.

    Standard Features:
    NIJ threat level III
    Single curve
    Multi-hit capability
    Defeats 7.62 mm NATO 148 gr. (.308 caliber) FMJ at 2780 fps
    Front / Back placement

    Size: 8″x10″ [20×25 cm]
    Weight: 4..8 Lbs. [2.2 Kg]
    Thickness: .70″ [1.8Cm]

    Size: 10″x12″ [25×30 cm]
    Weight: 6.2 Lbs. [2.8 Kg]
    Thickness: .25″ [.63Cm]

     

    Ceramic Hard Armor Plates

    Level IV Stand-Alone
    Single Curve

    Ceramic Hard Armor Plate - Threat Level IV
    STANDARD FEATURES:

    NIJ Threat Level: IV
    Single Curve
    Multi-hit Capability
    Front/Back placement
    Defeats 7.62mm NATO 148 gr. (.308) FMJ at 2780 fps without additional ballistic support

    Also defeats such rounds as:
    .30 caliber 166 gr. MZ Armor Piercing (AP) at 2880 fps
    30-06 AP 166 gr. at 2850 fps
    12 gauge slug at 0 meters
    7.62 × 51mm NATO ball ammunition at 0 meters
    7.62 × 51mm AP M-61 at 0 meters
    7.62 × 51mm Swiss Munitions AP (WC Core) at 0 meters
    7.62 × 39mm mild steel core, AK-47 at 0 meters
    7.62 × 54mm lead core ball ammunition, Dragunov Sniper Rifle at 0 meters
    7.62 × 54mm AP, Dragunov Sniper Rifle at 0 meters
    7.62 × 63mm AP at 0 meters
    5.56 × 45mm SS109/M855 at 0 meters
    5.56 × 45mm M193 ball at 0 meters
    5.45 × 39mm Russian ball at 0 meters

    Size: 10″x12″ [25×30 cm]
    Weight: 7.2 Lbs. [3.27 Kg
    Thickness: .70″ [1.8Cm

    NIJ Threat Level IV
    Triple-Curve

    Ceramic Hard Armor Plate - Threat Level IV, Triple Curve

    This plate is designed to defeat Level IV threats without additional ballistic support. The Triple-Curve design contours with the front of the torso for better movement. It is monolithic in design and has multi-hit capability.

    STANDARD FEATURES:
    NIJ Threat Level: IV
    Triple- Curve
    Multi-hit Capability
    Front placement

    Defeats 7.62mm NATO 148 gr. (.308) FMJ at 2780 fps without additional ballistic support
    Also defeats such rounds as:
    .30 caliber 166 gr. MZ Armor Piercing (AP) at 2880 fps
    30-06 AP 166 gr. at 2850 fps
    12 gauge slug at 0 meters
    7.62 × 51mm NATO ball ammunition at 0 meters
    7.62 × 51mm AP M-61 at 0 meters
    7.62 × 51mm Swiss Munitions AP (WC Core) at 0 meters
    7.62 × 39mm mild steel core, AK-47 at 0 meters
    7.62 × 54mm lead core ball ammunition, Dragunov Sniper Rifle at 0 meters
    7.62 × 54mm AP, Dragunov Sniper Rifle at 0 meters
    7.62 × 63mm AP at 0 meters
    5.56 × 45mm SS109/M855 at 0 meters
    5.56 × 45mm M193 ball at 0 meters
    5.45 × 39mm Russian ball at 0 meters

    Size: 10″x12″ [25×30 cm]
    Weight: 7.2 Lbs. [3.27 Kg
    Thickness: .70″ [1.8Cm]
    Please note: specifications and information listed on this page are subject to change without notice.

    These Chest Plates are not available for sale to the general public.
    Pricing and sales are for law enforcement and government agencies only!

    Get a Quote




    Must be used inconjuntion with one of our NIJ Level IIIA Police Tactical Vests
    [Please see our Tactical Vest Page for more information]

    Ceramic Hard Armor Plate Level IV Stand-Alone Single Curve 10"x12" plate
    Ceramic Hard Armor Plate NIJ Threat Level IV Stand-Alone Triple-Curve 10"x12" plate
    Polyethylene Ballistic Plate NIJ Threat Level III Single Curve 10"x12" plate
    Titanium / Steel Multi-Hit Hard Armor Plate Level III Single Curve 10"x12" plate

    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    31 May

    Bullet Resistant Helmets

    Tactical Helmet

    Tactical HelmetTactical Helmet

     

    The innovative design of our Tactical Helmet delivers maximum protection, comfort, and maneuverability. Exceeding military specification MIL-H-44099A and providing NIJ Threat Level IIIA protection, our helmet is superior to the PASGT (Personal Armor System Ground Troops) in form and function. Specifically cut and shaped around the ears, our Tactical Helmet provides optimal hearing so that agents will not be disadvantaged in hostile engagements. With superior shock absorption properties, and a three-point adjustment/suspension (which is offset from the helmet to protect from helmet deformation) our Tactical Helmet is simply the best ballistic helmet on the market today. Exceptionally comfortable, our tactical helmet is one of the strongest and lightest designs on the market today.

    Standard Features:
    Ideal for Special Operations, SWAT, and Tactical Personal
    Three point suspension system
    Interior shock absorption system
    Ergonomically fit
    Optimal ambient hearing
    Communication device friendly
    Adjustable headband

    NIJ Threat Level IIIA

    Size:
    Medium= 21″-23″ Weight: 2.4 Lbs
    Large= 22″- 24″ Weight: 2.8 Lbs

    Delta Force Helmet

    Delta Force Helmet

    Helmet Threat Level 3A
    Face Shield Threat Level 2

    The Delta Force Helmet provides all the features that are found in our tactical helmet, but with the added benefit of Threat Level 2 face protection. Our R&D team carefully designed the face shield to provide maximum protection while optimizing the user’s peripheral vision. This allows the user to be totally protected without being disadvantaged in hostile engagements.The Delta Force Helmet is the ultimate in design for providing face and head protection from a wide variety of ballistic threats.

    Standard Features:
    Ideal for Special Operations, SWAT, and Tactical Personal
    Three point suspension system
    Interior shock absorption system
    Ergonomically fit
    Optimal ambient hearing
    Communication device friendly
    Adjustable headband

    NIJ Threat Level IIIA (Helmet)
    NIJ Threat Level II (Face Shield)
    Exceeds military specification MIL-H-44099A
    Exceeds Current PASGT helmet

    Size:
    Medium= 21″-23″ Weight: 2.4 Lbs
    Large= 22″- 24″ Weight: 2.8 Lbs

    Please note: specifications and information listed on this page are subject to change without notice.

    Get a Quote






    Tactical Helmet NIJ Level IIIA
    Delta Force Helmet NIJ Level IIIA with NIJ Level II Face Shield


    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    31 May

    Police Tactical Vests

    Tactical Assault Vest

    Tactical Assault Vest

    The success of our Tactical Assault Vest is that it is our most tailored-style vest. In addition to standard features such as  NIJ level IIIA protection and front and back hard armor plate pockets, the Tactical Assault Vest can also be customized to meet any individual or departmental requirements (e.g. specifications for pouches, pockets, and departmental I.D). The above photos illustrate our standard, and one of our most popular configurations. A favorite amongst agents and special ops units, the Tactical Assault Vest   has proven itself the world over.

    Standard Features:
    One piece front and rear panel design greatly enhances integrity of vest
    Easy donning
    Adjustable shoulders and sides for the perfect fit.
    Side opening
    Front and back hard armor plate pockets
    Removable I.D. patches front and back
    Color: All Camouflage, Black, White, Blue, Tan. (others available)
    Standard Raider Jacket comes with the following pockets
    Radio pocket
    Utility pocket
    2 magazine pockets

    Optional Features:
    NIJ Level III or IV hard armor plates
    Removable ballistic groin protector
    Permanent/removable ballistic collar protector(can be ordered without collar)
    Optional 1000 denier Cordura® outershell
    Carry bag

    Available in NIJ threat levels II and IIIA

    Plate pocket size (two sizes to choose from)
    8″ x 10″ front and rear pockets
    10″ x 12″ front and rear pockets

    Urban Assault Vest

    Urban Assault Vest

    The development of the Urban Assault Vest is a result of feedback by Special Operation Units. The Urban Assault Vest  offers optimal mobility and full upper torso protection. Incredibly comfortable, the Urban Assault Vest  is also an ideal load-bearing tactical vest for extended duty operations or surveillance. Designed with our quick response utility pockets, access to your equipment will never be a problem. When every second counts, the Urban Assault Vest l will not fail you. With our front opening design, this tactical assault vest can be put on in seconds.

    Standard features:
    Front zipper opening for rapid access
    Overlapping front panels provide maximum center mass protection
    Adjustable sides to optimize wearability and provide a comfortable fit
    Easily accommodates right- or left-handed personnel
    Color: All Camouflage, Black, White, Blue, Tan, (others available)
    4 rapid access utility pockets in front for mags, flashbangs, gas and other equipment.
    Radio pocket on left side
    Flashlight pocket on back shoulder
    Front and back panel attach at shoulders
    Front and back 8″ x 10″ or 10″ x 12″ hard armor plate pockets
    Removable front and back identification
    Flex cuff compartment on either shoulder

    Optional Features:
    NIJ Level III or IV hard armor plates
    Removable ballistic groin protector
    Permanent/removable ballistic collar protector (can be ordered without collar)
    Optional 1000 denier Cordura® outershell
    Carry bag

    Available in NIJ threat levels II and IIIA

    Plate pocket size (two sizes to choose from)
    8″ x 10″ front and rear pockets
    10″ x 12″ front and rear pockets

     

    Tactical Entry Vest

    Tactical Entry Vest

    The Tactical Entry Vest not only provides full front, side, and back protection, it offers maximum neck protection as well. It is an ideal vest for wearing with tactical helmets. With front and back hard armor plate pockets, the TEV insures maximum protection for its user while maintaining optimal mobility. The Tactical Entry Vest was designed with full side and shoulder adjustments to insure the perfect fit. The Tactical Entry Vest (TEV) will be your best friend in any assault or breaching operation.

    Standard Features:
    Easy donning for rapid access
    Helmet Friendly ballistic collar
    Adjustable shoulders and sides for the perfect fit
    Side opening
    Removable I.D. patches front/back
    Color: All Camouflage, Black, White, Blue, Tan. (others available)

    Optional Features:
    NIJ Level III or IV hard armor plates
    Removable ballistic groin protector
    Permanent / removable ballistic collar protector (can be ordered without collar)
    Optional 1000 denier Cordura® outershell
    Carry bag
    Available in NIJ threat levels II and IIIA.

     

    Modular Vest

    Modular Vest

    Tired of being limited by other manufacturer’s modular vests? Our design gives the user total control to customize their modular armor system for mission specific operations. The Modular Vest offers full upper torso protection with optional collar and groin protector. Front and rear pockets accept optional 10″ x 12″ strike plates. Our Modular Vest accommodates right- or left-handed personnel easily. The ultimate in modular vest design, our Modular Vest has maximized placement area, allowing total freedom for placement of modular equipment pockets and accessories.

    Standard Features:
    Large modular grid system
    Practically limitless pocket and webbing configuration
    Balanced loads, front and back
    Concealed front and rear plate pockets
    Front zipper opening for rapid access or removal
    Overlapping front panels provide exceptional center mass protection
    Side adjustments to ensure a proper and comfortable fit
    Removable ballistic panels
    Removable rifle butt retention pad
    Dual flex cuff compartments on either shoulder for fast and easy access
    Front and back removable identification
    Excessive wear areas are reinforced to maximize longevity
    Reinforced drag bar
    Attachment system for communication wiring
    Includes four pouches to fit the modular grid system
    Color: All Camouflage, Black, White, Blue, Tan. (others available)

    Optional Features:
    NIJ Level III or IV hard armor plates
    Removable ballistic groin protector
    Permanent/removable ballistic collar protector (can be ordered without collar)
    Optional 1000 denier Cordura® outershell
    Carry bag

    Available in NIJ threat levels II and IIIA

    Plate pocket size (two sizes to choose from)
    8″ x 10″ front and rear pockets
    10″ x 12″ front and rear pockets

    Fitment Guide:

    Please note: specifications and information listed on this page are subject to change without notice.

    These vests are not available for sale to the general public.
    Pricing and sales are for law enforcement and government agencies only!

    Get a Quote






    Standard Bullet Resistant Vest : Available in NIJ Level IIA-IIIA
    Bullet & Stab Resistant Vest : Available in NIJ Level II Only


    SmallMediumLargeExtra LargeXX LargeXXX LargeXXXX Large


    Male VestFemale Vest


    NIJ Level IINIJ Level IIIA


    All CamouflageBlackOD GreenBlueTan



    Police Tactical Entry Vest with 10"x12" plate pocket
    Police Tactical Assault Vestwith 10"x12" plate pocket
    Police Urban Assault Vest with 10"x12" plate pocket
    Police Modular Vest with 10"x12" plate pocket

    [Please see out Tactical Vest Page for more information]

    Ceramic Hard Armor Plate Level IV Stand-Alone Single Curve 10"x12" plate
    Ceramic Hard Armor Plate NIJ Threat Level IV Triple-Curve 10"x12" plate
    Polyethylene Ballistic Plate NIJ Threat Level III Single Curve 10"x12" plate
    Titanium / Steel Multi-Hit Hard Armor Plate Level III Single Curve 10"x12" plate

    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    31 May

    Concealable Vests

    San Diego Concealable Vests

    San Diego Concealable Vest

    The San Diego Vest is specifically designed to provide maximum side protection by incorporating a front panel that wraps directly around the torso toward the back panel. Ideal for officers using Weaver Stance, the San Diego vest is known by law enforcement for providing full upper torso protection, including the kidney area. If you are looking for the maximum protection in concealable design without sacrificing comfort and weight, the San Diego Vest is the right choice. The San Diego Vest is a comfortable, lightweight, high performance vest that offers maximum protection at an affordable price.

    Standard Features:
    Available in both Male and Female styles
    Available in Ballistic/Stab-Shank Armor upon request
    Available in NIJ threat levels IIA, II, IIIA
    Color: All Camouflage, Black, White, Blue, Tan. (others available)

    Strap adjustment types 6 point elastic adjustment straps to ensures the perfect fit. The double adjustment straps on the shoulders, properly suspends the body armor for maximum comfort and prevents the ballistic panels from sagging.

    Side Panel Style Vest

    Side Panel Style Vest

    The Side Panel design offers full front, back, and side protection. The front and back ballistic panels wrap around the side to meet at the middle of the torso. Lightweight and exceptionally comfortable, the Side Panel style is designed to provide maximum protection for whatever your protective needs might be. Our most popular concealable vest, the Side Panel style is a lean, lightweight concealable vest that provides full upper torso protection.

    Standard Features:
    Available in both Male and Female styles
    Available in Ballistic/Stab-Shank Armor upon request
    Available in NIJ threat levels IIA, II, IIIA
    Color: All Camouflage, Black, White, Blue, Tan. (others available)

    Strap adjustment types 6 point elastic adjustment straps to ensures the perfect fit. The double adjustment straps on the shoulders properly suspends the body armor for maximum comfort and prevents the ballistic panels from sagging.

    Contour Concealable Vest

    Contour Concealable Vest

    Lightweight and discreet, the Contour Style is designed to allow for optimal ventilation and heat dissipation. The Contour style features full front, back, and partial side protection. If you need protection but being noticed is not an option, this is your ideal vest. Designed for undercover and extended duty assignments, the Contour style offers optimal comfort and protection in the harshest of environments.

     Standard Features:
    Available in both Male and Female styles
    Available in Ballistic/Stab-Shank Armor upon request
    Available in NIJ threat levels IIA, II, IIIA
    Color: All Camouflage, Black, White, Blue, Tan, (others available)

    Strap adjustment types 6 point elastic adjustment straps to ensures the perfect fit. The double adjustment straps on the shoulders, properly suspends the body armor for maximum comfort and prevents the ballistic panels from sagging.

    Please note: specifications and information listed on this page are subject to change without notice.

    Get a Quote





    Standard Bullet Resistant Vest : Available in NIJ Level IIA-IIIA
    Bullet & Stab Resistant Vest : Available in NIJ Level II Only


    SmallMediumLargeExtra LargeXX LargeXXX LargeXXXX Large


    Male VestFemale Vest


    NIJ Level IINIJ Level IIIA


    All CamouflageBlackWhiteBlueTan



    San Diego Concealable Vest
    Side Panel Style Vest
    Contour Concealable Vest

    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    29 Aug

    Land Mine/Blast Protection: VFI

    VFI (Variable Function Insert) is a solid rubber insert that fits securely around a multi-piece, “flat base” rim. The device is inserted into a tubeless tire, which is in turn fitted around the wheel, thus becoming an “assembly” of complimentary components all designed to work together to provide optimum mobility. The Bulldog VFI is also designed to function as both a beadlock and Run Flat, thus providing maximum performance in all terrain conditions. Most importantly, the VFI meets all U.S. military standards, as well as the FINABEL and NATO standards required by most European military agencies making the VFI the most widely used Run Flat in the world.

    Simply stated, a Run Flat Device provides continued mobility in the event of partial or complete loss of tire air pressure. Under attack conditions, a Run Flat increases survivability of the vehicle occupants by allowing them to drive safely to a safe location, even if the vehicle’s tires suffer complete air loss from hostile fire. Run Flat Tire inserts are bullet resistant, and offer added countermine protection to the vehicle and its occupants, and allow operations at high speeds as well as sustained mobility over any terrain.This system is normally sold as a complete assembly, consisting of the VFI Run Flat, Tire, and Wheel.

    Please note: specifications and information listed on this page are subject to change without notice.

    Military, Police, Government pricing and sales only!

    Get a Quote



    4 units per set


    Passenger Car
    SUV
    Pick-Up Truck
    Cargo Van
    Passenger Van
    Other:


    2dr4dr

    (ie. 235/70R/16)

    14"15"16"17"17.5"18"19.5"20"22.5"


    Standard VFI Run Flat Tire Inserts Only
    Countermine VFI Run Flat Tire Inserts Only
    Standard VFI Complete Assembly: Tire, Wheel, VFI Run Flat Tire Insert
    Countermine VFI Complete Assembly: Tire, Wheel, VFI Run Flat Tire Insert

    [ie. BF Goodrich 235/85R16 ] [This information is needed only if you are requesting pricing on Complete Assemblies]

    12 Months for Defects in Manufacture.
    Our Run Flat Tire Inserts are designed to work with TUBELESS Tires Only.

    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    29 Aug

    Bulldog SecureBands™ Tire Safety Bands

    Bulldog SecureBands Tire Safety Bands

    When a tire deflates, air pressure reaches a low point providing insufficient pressure to hold the tire in the correct position on the wheel. The tire bead can move around freely and drop into the wheel well resulting in loss of traction, braking and mobility. Sudden air loss can cause you to lose control of your vehicle resulting in catastrophic consequences. Enter the Bulldog SecureBand wheel safety system!SecureBands Illustration

    Bulldog SecureBand is designed to simply fit over the wheel well to prevent the tire bead from moving into the well.

    Bulldog SecureBand helps prevent the tire from coming off the wheel during a blowout or puncture.

    Bulldog SecureBand assists the driver in maintaining control of the vehicle as a result of a flat or blowout.

    Bulldog SecureBand helps maintain braking and mobility after tire deflation allowing driver to travel to a safe stop.

    Bulldog Direct Protective Systems Inc. is the sole U.S. distributor/manufacturer’s representative. We offer U.S. distributorships to RV dealers and other such companies. Please feel free to contact us regarding setting up a Distributorship.

    Our manufacturer is Rodgard Industries, with 25 years of industry leadership and innovation. You can be assured the Bulldog SecureBand is as robust as our other extended mobility products. Utilizing our state of the art testing facilities and technical expertise, we designed the world’s most advanced wheel safety system.

    With the Bulldog SecureBand we’ve taken the well filler wheel safety system concept to another dimension, keeping cost and quality as our top priorities.

    SecureBands IllustrationKEY FEATURES INCLUDE:

    • Cost Savings (our competitors sell a similar product for $2,000 per set)
    • Non-corrosive
    • 1 piece design vs. multi-piece design
    • User-friendly installation compared to other well fillers
    • Lightweight, flexible design for easy installation
    • No wheel damage during installation as seen with rigid designs
    • No impact on wheel balancing and driving performance
    • Quick connect feature for temporary installation
    • Adjustable length and width to fit all wheel profiles
    • Installed to a specified torque to assure proper fitment and performance
    • Ability to supply high volume “Big Series” design ready to mount, no extra pieces

    VEHICLE MARKETS SERVED INCLUDE:SecureBands Illustration

    • Police and Fire Vehicles
    • Trailers and Caravans
    • Cash in Transit Vehicles
    • VIP Vehicles
    • Diplomat Vehicles
    • Government Agencies
    • Safety Conscious Drivers

    Technical Data:
    Wheel Sizes: 13″ – 20″, one piece drop center
    Weight: 20 – 35 oz. depending on size (.56-1kg)
    Stainless steel band construction: non-corrosive
    Reinforced Fastening Mechanism, toughened stainless steel
    Maximum Torque: 13 lb-ft (18 N-m)

    Polymer Segments:
    Specially formulated, heat resistant to 509°F (265°C)
    Resistant to bending and deformation under sever loads
    Symmetrical design allows for proper wheel balancing
    Segmented design allows tire to grip for maintained traction

    Accepts tire pressure monitoring systems
    Adjustable for all drop center geometries
    No special tools needed for assembly

    Our Bulldog SecureBands install in minutes following the step-by-step instructions provided with each set of Tire Safety Bands.

    Distributorships available!

    Bulldog SecureBands are waranteed 12 month for defects in manufacturing.

    Distributors, fleet vehicle users, vehicle builders: your inquires are welcome!

    Please note: specifications and information listed on this page are subject to change without notice.

    Get a Quote



    Minimum order is one set / 4 units per set


    Passenger Car
    SUV
    Pick-Up Truck
    Cargo Van
    Passenger Van
    Other:


    2dr4dr

    (ie. 235/70R/16)

    14"15"16"17"17.5"18"19.5"20"22.5"

    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    29 Aug

    Custom Wheels

    Custom WheelsBulldog Direct offers you a complete turnkey package built to our high standards of performance in our new state of the art wheel center. Our experienced engineers can design, engineer and manufacture wheels to meet every specialized need; they can even produce an entire “private label” line of wheels for your requirements of wheels for automobiles, trucks, military vehicles, or high-security armored limousines.

    Our Service Includes: all requisite Certifications of Compliance to whatever standards are required by your end user. Performed by independent testing laboratories. We can manufacture wheels in steel, or forged or cast aluminum, in one, two or three piece units, as required by your vehicles design needs. Multi-piece wheels can be bolted or welded together.

    All wheels can be built to the load bearing specifications as required for your custom application. We can manufacture Custom Wheels up to 24″ in diameter. Wheel surfaces are prepared for finishing via an aqueous pre-treatment process, electrostatic powder coated and cured in a high temperature oven to produce a high quality corrosive-resistant finish in the color of your choice.

    Ceramic Hard Armor Plate - Threat Level IV

    29 Aug

    CRF Run Flat Tire Inserts Installation

    CRF Run Flat Tire Insert installation process

    #1 Inspect wheel before installing… clean wheel and install metal valve supplied with your order.

    #2 Ensure that the CRF will properly fit your wheel! Position CRF arcs against wheel and confirm they are properly mated. Install bolts to ensure CRF is secure to wheel drop center; continue to tighten bolts until joint faces are together. For additional tightness, rotate one or both washers 180 degrees as needed.

    CRF Run Flat Tire Insert installation process,run flat being fitted on wheel

    #3 Insert the two “arcs” into tire with flanges and washers facing up. Apply Locktite to bolt threads. Connect “arcs” loosely with one bolt, as shown in photo below.

    CRF Run Flat Tire Insert installation process,run flat being fitted inside tire

    The Bulldog Direct CRF is NOT a run flat tire like Goodyear and Firestone’s run flat tires, but a tire rim insert that is custom manufactured to fit your vehicle tire rim. Manufactured from a lightweight space age ballistic composite and balanced during manufacture, it will not create any tire-wheel imbalances. Use your existing tires and rims!

    CRF Run Flat Tire Insert installation process,run flat being fitted inside tire

    #4 Fit inboard tire bead and CRF on your wheel and allow CRF to move into the wheel’s drop center.

    CRF Run Flat Tire Insert installation process, run flat being fitted on tire machine

    #5 With outboard tire bead on outside of wheel flange, place steel mounting rods (mounting kit provided with your order) in the 1/2″ holes provided on each side of the CRF. Slip adjustment band over mounting rods.  Laterally spread rods at top, closing the CRF. Install the remaining bolt, apply Locktite to bolt threads and tighten all bolts and torque to 50 ft. lbs. Installation takes about 20 minutes per wheel.

    CRF Run Flat Tire Insert installation process, run flat being fitted on tire machine for final installation

    #6  Secure mechanical lock over all connection bolts.  Attach with Phillip’s head screws provided.  Mount outboard tire bead and inflate tire to manufacturer’s recommended pressure for load carried.  Re-balance finished assembly, and you’re done!

    Fits standard rim sizes: 13″ 14″ 15″ 16″ 17″ 17.5″ 18″ 19.5″ 22.5″

    For Family Cars, Trucks, Vans, Police, Fire, Safety Vehicles

    Please note: specifications and information listed on this page are subject to change without notice.

    Return to CRF Run Flat Tire Inserts Page

    29 Aug

    Composite Run Flat Tire Inserts

    Air Leaks | Road Debris | Pot Holes | Ballistics
    We Protect You!

    Installation Instructions

    CRF Animation

    This is a reinforced polymer device designed to provide flat tire mobility when used with pneumatic tires. This special composite material reduces friction and heat buildup inside a flat tire. The Bulldog Direct “CRF” is not a run flat tire, but a tire rim insert that is custom manufactured to fit your vehicle’s tire and rim specifications. When your existing tires have worn out and need to be exchanged for a new set, our Run Flat Tire Inserts may be removed and installed with the new set of tires, giving the vehicle owner many years, and thousands of miles of use.

    Our Standard “CRF” offers Bullet Resistant Protection from Handgun and Rifle Rounds.

    Our Composite Run Flat Tire Inserts Can handle the added weight of a Heavily Armored Vehicle, something that Goodyear and Firestone’s Run Flat Tires are not designed to do.

    CRF Runflats

    The Bulldog Direct “Composite Run Flat Tire Inserts” or “CRF” helps ensure family vehicle safety and accident prevention by virtually eliminating the effects normally associated with rapid tire deflation and high speed blow-outs. The driver of a CRF equipped vehicle typically maintains control of the vehicle and continues to drive until the tire can be inspected and/or changed at a safe location. The CRF can also facilitate a fast getaway from vehicle attacks, which are so common today! An important consideration for vehicles frequently driven into dangerous areas or used in situations where security is paramount.

    The Bulldog Direct CRF is not a Run Flat Tire like Goodyear or Firestone’s tires, but a tire rim insert that is custom manufactured to fit your vehicle’s tire and rim specifications. Manufactured from a lightweight space age ballistic composite and balanced during manufacture, the Run Flat Tire Insert will not create any tire-wheel imbalances. Use your existing tires and rims! Another advantage of our Run Flat Tire Inserts is our “One Time Cost.” When your existing tires have worn out and need to be exchanged for a new set, our Run Flat Tire Inserts may be removed and installed with the new set of tires, giving the vehicle owner many years, and thousands of miles of use.

    CRF – the “Composite Run Flat Tire Insert,” is a reinforced polymer device designed to provide flat tire mobility when used with pneumatic tires. This special composite material reduces friction and heat buildup inside a flat tire. The CRF is easily mounted inside a standard tubeless tire on a traditional “drop center style” wheel using normal tire mounting tools. Each CRF is custom built to meet the specific load rating criteria and distance requirements of the application. CRF products are specified on numerous government and security vehicles where flat tire mobility is critical. In addition, the CRF is used on emergency vehicles, prisoner transport trucks and surveillance vehicles and in similar applications where continued mobility is essential.

     Pricing and sales are limited to 2014 to 2024  year vehicles years only! Minimum order is one set of (4) wheels.

    We will not respond to pricing requests outside of 2014 to 2024 year vehicles

    CRF Run-Flat Tire Inserts

    Please note: specifications and information listed on this page are subject to change without notice.

    Get a Quote



    ( Minimum order is one set of 4 units!)

    Standard Set of 4 CRF Style Run Flat Tire Inserts
    * Land Mine / Blast Protection Type Run Flat Tire Inserts set of (4) (This is a Complete Assembly : Tire Wheel, Run Flat Tire Insert)

    *Special Requests Only. Not for general use!


    Passenger Car
    SUV
    Pick-Up Truck
    Cargo Van
    Passenger Van
    Other:


    2dr4dr

    (ie. 235/70R/16)

    14"15"16"17"17.5"18"19.5"22"22.5"

    For 20" rims, please see Rodgard Run Flat Tire Inserts.

    12 Months for Defects in Manufacture.
    Our Run Flat Tire Inserts are designed to work with TUBELESS Tires Only.
    Our Run Flat Tire Inserts ARE NOT Designed to work with Existing Run Flat Type Tires and Wheels - Rims.

    Due to the nature of our products and services, we require some information listed below, before we can provide you with a price quotation.We do not provide pricing over the phone.

    Fields marked in red (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    29 Aug

    Composite Run Flat Tire Inserts

    Air Leaks | Road Debris | Pot Holes | Ballistics
    We Protect You!

    Installation Instructions

    CRF Animation

    This is a reinforced polymer device designed to provide flat tire mobility when used with pneumatic tires. This special composite material reduces friction and heat buildup inside a flat tire. The Bulldog Direct “CRF” is not a run flat tire, but a tire rim insert that is custom manufactured to fit your vehicle’s tire and rim specifications. When your existing tires have worn out and need to be exchanged for a new set, our Run Flat Tire Inserts may be removed and installed with the new set of tires, giving the vehicle owner many years, and thousands of miles of use.

    Our Standard “CRF” offers Bullet Resistant Protection from Handgun and Rifle Rounds.

    Our Composite Run Flat Tire Inserts Can handle the added weight of a Heavily Armored Vehicle, something that Goodyear and Firestone’s Run Flat Tires are not designed to do.

    CRF Runflats

    The Bulldog Direct “Composite Run Flat Tire Inserts” or “CRF” helps ensure family vehicle safety and accident prevention by virtually eliminating the effects normally associated with rapid tire deflation and high speed blow-outs. The driver of a CRF equipped vehicle typically maintains control of the vehicle and continues to drive until the tire can be inspected and/or changed at a safe location. The CRF can also facilitate a fast getaway from vehicle attacks, which are so common today! An important consideration for vehicles frequently driven into dangerous areas or used in situations where security is paramount.

    The Bulldog Direct CRF is not a Run Flat Tire like Goodyear or Firestone’s tires, but a tire rim insert that is custom manufactured to fit your vehicle’s tire and rim specifications. Manufactured from a lightweight space age ballistic composite and balanced during manufacture, the Run Flat Tire Insert will not create any tire-wheel imbalances. Use your existing tires and rims! Another advantage of our Run Flat Tire Inserts is our “One Time Cost.” When your existing tires have worn out and need to be exchanged for a new set, our Run Flat Tire Inserts may be removed and installed with the new set of tires, giving the vehicle owner many years, and thousands of miles of use.

    CRF – the “Composite Run Flat Tire Insert,” is a reinforced polymer device designed to provide flat tire mobility when used with pneumatic tires. This special composite material reduces friction and heat buildup inside a flat tire. The CRF is easily mounted inside a standard tubeless tire on a traditional “drop center style” wheel using normal tire mounting tools. Each CRF is custom built to meet the specific load rating criteria and distance requirements of the application. CRF products are specified on numerous government and security vehicles where flat tire mobility is critical. In addition, the CRF is used on emergency vehicles, prisoner transport trucks and surveillance vehicles and in similar applications where continued mobility is essential.

     Pricing and sales are limited to 2014 to 2024  year vehicles years only! Minimum order is one set of (4) wheels.

    We will not respond to pricing requests outside of 2014 to 2024 year vehicles

    CRF Run-Flat Tire Inserts

    Please note: specifications and information listed on this page are subject to change without notice.

    Get a Quote



    ( Minimum order is one set of 4 units!)

    Standard Set of 4 CRF Style Run Flat Tire Inserts
    * Land Mine / Blast Protection Type Run Flat Tire Inserts set of (4) (This is a Complete Assembly : Tire Wheel, Run Flat Tire Insert)

    *Special Requests Only. Not for general use!


    Passenger Car
    SUV
    Pick-Up Truck
    Cargo Van
    Passenger Van
    Other:


    2dr4dr

    (ie. 235/70R/16)

    14"15"16"17"17.5"18"19.5"22"22.5"

    For 20" rims, please see Rodgard Run Flat Tire Inserts.

    12 Months for Defects in Manufacture.
    Our Run Flat Tire Inserts are designed to work with TUBELESS Tires Only.
    Our Run Flat Tire Inserts ARE NOT Designed to work with Existing Run Flat Type Tires and Wheels - Rims.

    Due to the nature of our products and services, we require some information listed below, before we can provide you with a price quotation.We do not provide pricing over the phone.

    Fields marked in red (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.