A quotation request form can be Found at the Bottom of the Page
Armored Vehicle Heavy Duty Window Actuator
Also called Armored Vehicle Window lifts / Window Regulator/ Scissor Type Window Regulators
When installing Bullet Resistant Glass in a vehicle you will need to upgrade /replace the standard window regulations that came with your vehicle.
Why you ask? the standard window glass in in most vehicles weighs about five pounds for side door glass and maybe twenty pounds for a windshield. With an average thickness of about ¼”. Curved Bullet Resistant Vehicle Glass on the other hand can be anywhere from 9/16” (14MM) to 3-3/16” (78MM) thick, weighing from 5.3 lbs. per sq. ft (25 Kg M2) to 34 lbs. per sq. Ft.(180 Kg/M2) As you can imagine your standard vehicle window motor is not made to lift so much extra weight, or offer safety and reliability.
Bulldog Direct’s Heavy Duty Window Actuator is custom made to handle the added weight and thickness of the Curved Bullet Resistant Vehicle Glass, with safety and reliability. (See photo below)
BD-9013 Light Weight Window Lift 12 volt. stroke 10.47”, weight 12.31 lbs. Can handle glass up to 22mm 0.87” thick ,with a weight of 67 lbs.
BD-9000 Standard Window Lift 12 volt. stroke 11.77”, weight 15.21 lbs. Can handle glass up to 33mm 1.34” thick ,with a weight of 100 lbs.
One question some customers have is “Will the glass still roll down all the way?” In most cases No, Modern vehicle doors are not wide enough for the glass to fit all the way down into the door cavity. In most cases you can expect a roll down of about 3” to 10” (this is called the “Stroke”) depending on the type of vehicle you have. From a security concern having Bullet Resistant Vehicle Glass in your vehicle the windows should always be rolled all the way up, and only rolled down to pass documents, or situations where it is safe to open the window Bulldog Direct’s Heavy Duty Window Actuator can lift from about 67 Lbs. (Light weight lift) and 100 Lbs. ( Standard window lift) Our window Armored Vehicle Window lifts are a universal fit, with mounting hardware included with the order. A 14” wiring harness is standard, with a simple plug in to your existing wiring harness. Some applications may require fabrication of a “glass to frame “bracket. Also, some modifications may be necessary to the inside of the door for your custom installation. Please feel free to give us a call with any questions you may have 513-28-6700
Get a Quote
All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales: We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited. You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions Using a credit card for payment does not absolve you from following our terms and conditions of sale.