Author: Dave Applegate

    28 Aug

    Bullguard™ Bullet Resistant Clear Plastics

    Bullet Resistant PlasticBullguard Clear Plastics Sheets are a Bullet Resistant laminated product, often referred to as “lexan”, Makrolon Hygard, or GE lexan. Our Bullet Resistant clear laminated polycarbonate sheets are U.L. and N.I.J. listed. Our bullet proof laminated clear plastics are often used in fast food / carryout stores, liquor stores, bank teller windows, and entrance reception areas as bullet resistant partitions.

    Bullguard Level 1 is a .758″ thick transparent sheet with exceptional optical clarity which maintains light transmission of 84%. N.I.J. level I [ 3- shots .9mm 124 grain handgun rounds in a multi-hit situation.] 4.8 lbs per sq.ft.

    Bullguard Level II is a 1″ thick transparent sheet with exceptional optical clarity which maintains light transmission of 84%. N.I.J. level II [ .9mm & .357 magnum handgun rounds in a multi-hit situation.] 6.5 lbs per sq.ft.

    Bullguard Level IIIA is a 1.25″ thick transparent sheet with exceptional optical clarity which maintains light transmission of 84%. N.I.J. level IIIA [.9mm, .357, & .44 magnum handgun rounds in a multi-hit situation.] 8.1 Lbs per sq.ft.

    All Bullguard laminated products feature hard coated surfaces for exceptional resistance to abrasion and UV degradation.

    Bullguard laminated products are warranted against coating failure, excessive yellowing and structural delamination caused by manufacturing defects.

    “Do It Yourself” Protection! Order the sizes you need from above and install them yourself.

    Fabrication: Table saw with a blade having carbide tips and a “triple chip” tooth design. You can also use a bandsaw or hand-held saber saw. Bullguard can also be drilled. All of our Glass Systems are made in the USA.

     

    Please note: specifications and information listed on this page are subject to change without notice. Price quotations and invoices will list current updated specifications and information, if any.

    Get a Quote




    2' x 2'2' x 4'2' x 8'4' x 4'4' x 8'Custom Size:

    (height by width)

    Bullguard Plastics NIJ Level I/U.L.Level 1 .758" Thick 4.8 Lbs per sq. ft. Protection from: .9mm handguns and lesser threats

    Bullguard Plastics NIJ Level II/ U.L. Level 2 1" thick , 6.5 lbs per sq.ft. Protection from: .9mm & .357 magnum handgun rounds and lesser threats.

    Bullguard Plastics NIJ Level IIIA /U.L. Level 3 1.25" thick 8.1 Lbs per sq.ft. Protection from: .9mm , .357 & .44 magnum handgun rounds and lesser threats.

    12 Months for Delamination & Defects in Manufacture


    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    28 Aug

    Curved Bullet Resistant Glass FAQ

    Can Curved Bullet Resistant Vehicle Glass made for any vehicle?
    Is Curved Bullet Resistant Vehicle Glass thicker than normal glass?
    Is Curved Bullet Resistant Vehicle Glass heavier than normal glass?
    Will My Side Door Windows Still Roll Up and Down?
    How does thicker Curved Bullet Resistant Vehicle Glass fit in my vehicle?
    What about my rear window defroster… will it still work?
    Is Curved Bullet Resistant Vehicle Glass expensive?
    Why is Curved Bullet Resistant Vehicle Glass expensive?
    How is Curved Bullet Resistant Vehicle Glass Manufactured?

    James Bond movies and television shows have made “Bulletproof Glass” a household name. It has become a mysterious enigma, so to speak. We will try and dispel the mystery and misinformation about bulletproof glass.

    Curved Glass

    In the real world, “bullet proof” does not exist. When speaking in terms of protection from hand guns and rifles the proper term is bullet resistant, as nothing is truly bulletproof. If given enough time and effort, any bullet resistant product can be defeated.

    Bullet resistant glass is not at all like it has been portrayed. In movies and TV, bullet resistant glass is portrayed as being no thicker or different from “normal” glass. Bullet resistant glass is often assumed to be “bulletproof,” and it is assumed that it just stops bullets with no regards what is being shot at the glass from a small handgun to rockets. On TV, the bullets just bounce off the glass and away you go! The photo below shows the impact of a bullet into real bullet resistant glass. (Note that the bullets are embedded into the glass)

    Bullet Proof Glass shot two times with a high powered rifle

    Bullet resistant glass is manufactured in different protection levels: from level 2, stopping handguns such as .9mm & .357 Magnums at .825″ thick, to our Level 7- Armor Piercing Protection from a .30-06 Rifle at 2.27″ thick. As the level of protection increases, so does the weight, thickness and price.

    Let’s start by explaining what bullet resistant glass is in the first place:

    Illustration for how our bullet resistant automotive glass is laid up, photos shows the different layers of glass

    Curved Bullet Resistant Vehicle Glass is a Glass-Clad Polycarbonate multi-ply composite laminate combing polycarbonate and glass using special polyurethane high adhesion bonding interlayers which allow or the expansion/contraction differential of both materials. This special interlayer and the manufacturing process are key elements in controlling the 10:1 thermal expansion ratio. This design allows us significant latitude to almost any ballistic threat from .9mm handguns to .30-06 AP rounds. Combining the the obvious advantages of glass and polycarbonate provides three primary benefits over ALL-Glass composites. #1= Thickness and weight savings up to 60% over conventional ALL-Glass systems. #2= Multiple impact protection and high ballistic protection from rifles. #3= The high structural integrity of polycarbonate with the abrasion, chemical, flame resistance of glass.

    Polycarbonate is plastic material thirty times stronger than acrylic, which is seventeen times stronger than an equal thickness of single strength glass. Polycarbonate, therefore, is an excellent impact barrier and is used as the core material of our bullet resistant composite. Polycarbonate is susceptible to abrasion, scratching, chemical attack, heat and flame. Polycarbonate alone is not an effective ballistics barrier above handgun protection. Our solution is a combination of these materials to take advantage of their benefits while eliminating their individual shortcomings.

    All of our protective glass systems are directly interchangeable with OEM (Original Equipment Manufacturer) glass. Our Curved Bullet Resistant Vehicle Glass meets standards set by: [ANSI] American National Standards Institute, [SAE] the Society of Automotive Engineers [DOT] Department of Transportation, and [ASTM] American Standard Testing Materials. Ballistic testing provided by: H.P. White Laboratories Inc.

    Curved Vehicle Glass

    Question: Can Curved Bullet Resistant Vehicle Glass made for any vehicle? 

    Answer: Curved Bullet Resistant Vehicle Glass can be custom manufactured for most vehicles. However, some vehicles are not well suited for Bullet Resistant Vehicle Glass, vehicles such as Chevrolet Camaro and Corvette, Dodge Viper, Pontiac Trans-Am, and other such vehicles. Vehicles with no upper door frame and convertible top vehicles are NOT good choices for Curved Bullet Resistant Vehicle Glass.

    Question: Is Curved Bullet Resistant Vehicle Glass thicker than normal glass?

    Answer: Standard Auto Glass is 5/32″ thick. Unlike in Bond movies and television shows, real Curved Bullet Resistant Vehicle Glass is anywhere from .825″ to 2.27″ thick.

    Question: Is Curved Bullet Resistant Vehicle Glass heavier than normal glass? 

    Answer: The standard auto glass in your vehicle weighs approx. 3.5 lbs per sq.ft. Real Curved Bullet Resistant Vehicle Glass weight is anywhere from 8.98 lbs.per sq. ft. to 26.71 lbs. per sq. ft.

    bulletproof vehicle glass drivers door
     

    Question: Will My Side Door Windows Still Roll Up and Down? 

    Answer: Curved Bullet Resistant Vehicle Glass does not work very well in the rolled down position! All kidding aside, installing a set of Curved Bullet Resistant Vehicle Glass in your vehicle is a very serious consideration. Our Curved Bullet Resistant Vehicle Glass is designed to save your life from handguns and rifles. Operable side door vehicle glass is not very common in vehicle armoring.

    Standard auto glass is 5/32″ thick. Most modern vehicle doors now have side air bags, side impact braces, etc. There is usually not much room left for thicker bullet resistant glass to fit inside the door without some modification to the door and trim. In most cases you can expect to get from 4″-7″ of roll down, depending on your type of vehicle and level of protection needed.

    Question: How does thicker Curved Bullet Resistant Vehicle Glass fit in my vehicle?

    Answer: Curved Bullet Resistant Vehicle Door Glass is manufactured with glass offsets. If you look at the photo (above left) of the open drivers door, you will notice a partly rolled down bullet resistant window. You will notice that we have left an apron 1″ of glass that is just a little thicker than the glass in your current vehicle, or “offset”. These “offsets” are at the top and sides of the door, thus allowing our thicker glass to fit inside your vehicles door frame. With the Bullet Resistant window rolled all the way up, or permanently installed, the glass rests against the rubber window trim, with the addition of a black paint band around the glass as the above photo shows. We are able to hide this offset from showing. This also optically hides the thickness of the glass from view, making your vehicle look stock.

    Curved bullet resistant vehicle windshields and back lights are manufactured in much the same way as side door glass. That thick black paint border on most vehicles is there for one reason: to hide where the glass is glued to your vehicle and where the inside trim meets the glass. If the windshield were removed from your vehicle, you would notice that there is an “offset” in the metal on the roof and spiller posts. This “offset” is approx. 1-2″ wide and the thickness of your vehicles OEM Glass. These “offsets” are at the top and sides of the windshield. The back light and rear window also has an “offset” of approx. 1-2″ wide plus the thickness of your vehicle’s OEM glass around all sides. We manufacture an apron 1″ of glass that is just a little thicker than the glass in your current vehicle or “offset”. These “offsets” allow our thicker glass to fit inside your vehicles windshield and rear window frames. Again, with the addition of a black paint banding around the glass, we are able to hide this offset from showing. This also optically hides the thickness of glass from view, making your vehicle look stock.

    Question: What about my rear window defroster… will it still work?

    Answer: We can manufacture Curved Bullet Resistant rear windows using the existing glass, along with with our glass and polycarbonate, or we can add heat strips to the unit in our manufacturing process.

    Question: Is Curved Bullet Resistant Vehicle Glass expensive?

    Answer: You would be surprised at the replacement cost for your vehicles OEM (Original Equipment Manufacturer) Glass. OEM glass for your vehicle could be from around $2,500.00 to over $6,000.00 in price for a Ford Expedition. Pricing for Curved Bullet Resistant Vehicle Glass can start from around $7,000.00 to well over $20,000.00, depending on your type of vehicle and level of protection needed.

    Question: Why is Curved Bullet Resistant Vehicle Glass expensive?

    Answer: Fair question… most individuals have never been in the market for Curved Bullet Resistant Vehicle Glass and have nothing to base a price quotation on, other than what they feel the price should be. An informed consumer is always in a better position to make a decision with the proper knowledge and information.

    The custom manufacture of Curved Bullet Resistant Vehicle Glass is part art, part science, and requires the proper equipment and technical expertise. Curved Bullet Resistant Vehicle Glass can cost anywhere from $6,000.00 for a pick up truck to $18,000.00 for a large SUV.

    How Curved Bullet Resistant Vehicle Glass is Manufactured: 

    bullet proof glass manufacturing process showing clean room and autoclave

    Vehicle Glass Molds: The custom manufacture of Curved Bullet Resistant Vehicle Glass starts with us making a set of molds of your vehicle’s OEM glass. The molds are an exact copy of the glass in your vehicle. This gives us all of the curvature and bends that your vehicle’s glass has. These molds will be later used in the bending process explained below.

    Layout and Cutting: The next step in manufacturing process is to cut all of the needed door and window units from flat sheet glass stock, along with the sheets of polycarbonate and polyurethane bonding interlayers. The first layer of of glass is cut to the exact size of your vehicle’s OEM glass. The next layer is the first of several of polyurethane bonding interlayers. The next set of glass is cut to the “offsets” as described above. The final “lay-up” can be from 2-5 units of glass and 1-2 layers of Polycarbonate. The inside of your new Curved Bullet Resistant Vehicle Glass can be manufactured for you in two ways: Low Spall: (Glass on the inside of the vehicle) and No-Spall: (Polycarbonate on the inside of the vehicle).

    Glass Bending: The next step in manufacturing process is the “bending” oven. Here, the molds come into play. We take the cut flat glass and polycarbonate units as described above, and set them on the molds in the bending oven. Bending ovens look almost like giant pizza ovens. The “lay-up” heats up slowly over eight hours to a certain temperature and then slowly slumps the glass to the exact size and dimensions of the mold. The bent glass must slowly cool down again over about 8 hours before it can be safely removed from the bending oven. At this point, the glass is very fragile any quick temperature change during the cool down process will cause the unit to break or crack, at which point the process must be started over.

    bullet resistant glass manufacturing process showing clean room and autoclave

    Clean Room Assembly: Once the “lay-up” has cooled down properly and has been removed from the bending oven, all the individual units are completely cleaned. We now take the cleaned “lay-up” to our cleanroom for final assembly. There, all the bent glass and the layers of polyurethane bonding inter-layers are assembled in the proper configuration. Then, we thoroughly inspect the final assembly for proper size, and for defects in the manufacturing process. Our General Manager, Shop Foreman, and Production Manager must all check off on the final assembly before it is sent to the autoclave for final bonding of the unit.

    Vacuum Bag Assembly: After passing our very stringent inspection, the full “lay-up” is then inserted into a vacuum bag and sealed. We then pull a vacuum on the bag, removing all of the air.

    Autoclaving: The final step in manufacture is loading the vacuum bagged assembly in to one of our two large autoclaves. (These are just a slightly larger version of what your local dentist uses to sterilize their instruments.) The heat and pressure of the autoclave bonds all of layers of polyurethane, glass, and bonding interlayers together. The autoclave cycle takes 12 hours to bond the vacuum bagged assembly in to the finished product. It also takes about 8 hours for proper cooldown time.

    Final Inspection & Boxing: After the finished Curved Bullet Resistant Glass has been removed from the autoclave, it is rechecked against the molds and OEM glass to make sure the new glass has a proper fit and appearance. Again our General Manager, Shop Foreman, and Production Manager must all check off on the final assembly before it is boxed for shipment to you.

    Bulldog Direct’s Bullet Resistant Vehicle Glass Systems provide Ballistic Protection that is designed to defeat National Institute of Justice [ N.I.J.] and Underwriters Laboratories [ U.L.] threat levels.

    Tested By: H.P. White Laboratories Inc.

    Return to Curved Bullet Resistant Glass Page

    28 Aug

    Curved Bullet Resistant Vehicle Glass

    Curved Bullet Resistant Vehicle Glass

    armored-cars-5

    Curved Bullet Resistant Vehicle Glass is a glass-clad polycarbonate multi-ply composite laminate combing polycarbonate and glass using special polyurethane high adhesion bonding interlayers which allow the expansion / contraction differential of both materials. Our Protective Glass systems are directly interchangeable with OEM (Original Equipment Manufacturer) parts. Our Curved Bullet Resistant Glass meets standards set by: (ANSI) American National Standards Institute, (SAE) the Society of Automotive Engineers (DOT) Department of Transportation, and (ASTM) American Standard Testing Materials. Ballistic testing provided by: H.P.White Laboratories Inc.
    Our Curved Bullet Resistant  Vehicle Glass is only sold as a full  vehicle set. We do offer single replacement  units for existing armored vehicles.All of our Glass Systems are made in the USA.

     


    We have protection levels from .22 Handguns to Armor Piercing Assault Rifle rounds.
    Our most common level sold is AUTO-3 ( See chart below)

    For a price quotation, please fill out the ” Quotation Request Form” below, and we also require a phone call from you before we can provide you with a price quotation: 513-281-6700 M-F 9:AM to 5:PM: EST; USA

     

     Pricing and sales are limited to 2015 to 2024  year vehicles years only! Sorry No Exceptions . 

    Frequently Asked Questions

    Bullet Resistant Glass for Vehicles: Glass -Clad Polycarbonate
    ProductThicknessWeightNIJ LevelCIN LevelStanagThreat
    Auto-214 MM
    9/16″
    25.2 Kg/m2
    5.3 Lbs. Sq. Ft.
    II BR-3.9mm,.357 Magnum Handguns and lesser threats.
    Auto-322 MM
    7/8″
    46.6 Kg/m2
    8.8 Lbs. Sq. Ft.
    IIIABR-49mm,.357,.44 Magnum Handguns and lesser threats.
    Auto-439 MM
    1-1/2″
    88 Kg/m2
    18 Lbs. Sq. Ft.
    IIIBR-6I5.56×45 [SS 109], 7.62×39 MSC, 7.62×51 FMJ and lesser threats.
    Auto-542 MM
    1-5/8″
    94 Kg/m2
    18.5 Lbs. Sq. Ft.
    IIIBR-6IMulti hit 7.62 x 51 FMJ and lesser threats.
    Auto-657 MM
    2-1/4″
    130 Kg/m2
    27 Lbs. Sq. Ft.
    IV.30-06 AP and lesser threats.
    Auto-778 MM
    3-3/16″
    180 Kg/m2
    34 Lbs. Sq. Ft.
    BR-77.62×51 AP and lesser threats.

    Installing a set of Curved Bullet Resistant Vehicle Glass is a start! You should also consider some type of Armor Panels for the doors and side wall. Or a complete Vehicle Armor Kit ( Handgun protection only)

    Please note: specifications and information listed on this page are subject to change without notice.


    Pricing and sales are limited to 2015 to 2024 year vehicles years only!
    Sorry No Exceptions.

     

    A few things to consider before requesting a price quotation:

    *Pricing starts at around $8,000 to $10,00.00 for small vehicles to over $14,000.00 and up for larger vehicles.
    *Modifications are needed to the vehicle doors for the installation.
    * Side door glass can be made to open from 4″-8″ Heavy Duty window lifts may be required to operate some of the heaver  glasss levels.

    *Is your vehicle a good fit to install Curved Bullet Resistant Vehicle Glass

    *Some vehicles are not well suited for the installation of our Curved Bullet Resistant Vehicle Glass, such as small compact cars: Like the Chevrolet Camaro, Corvette, Dodge Viper, Ford Mustang, Pontiac Trans-Am
, all Tesla Models, and any convertible top vehicle.

    *
    Vehicles that are well suited for our Vehicle Glass are: Chevrolet Suburban, Toyota Landcruiser, Pick up trucks, 
or other such heavy-duty 4 wheel drive vehicles.


    In addition to submitting the below Quotation Request!

     

     

    We also require a phone call from you before a price quotation will be provided.

    513-281-6700 M-F 9:AM To -5:PM: EST


     

    Ballistic Charts.

    Get a Quote



    Passenger CarSUVPick-Up TruckCargo VanPassenger VanOther


    2dr4dr

    Auto-2 Protection From: .9mm,.357 Magnum Handguns and lesser threats. Thickness: 4 mm / 9/16" Weight: 25.2 Kg/m2 (5.5 Lbs Sq. Ft.)


    Auto-3 Protection From: .9mm,.357, .44 Magnum Handguns and lesser threats. Thickness: 22 mm / 7/8" Weight: 46.6 Kg/m2 (8.8 Lbs Sq. Ft.)


    Auto-4 Protection From: 5.56 x 45 SS 109, 7.62 x 39 MSC, 7.62 x 51 FMJ and lesser threats. Thickness: 39 mm / 1-1/2" Weight: 88 Kg/m2 (18 Lbs Sq. Ft.)


    Auto-5 Protection From: Multi hit 7.62 x 51 FMJ and lesser threats. Thickness: 42 mm / 1-5/8" Weight: 94 Kg/m2 (18.5 Lbs Sq. Ft.)


    Auto-6 Protection From: .30-06 AP and lesser threats. Thickness: 57 mm / 2-1/4" Weight: 130 Kg/m2 (27 Lbs Sq. Ft.)


    Auto-7* Protection From: 7.62 x 51 AP lesser threats. Thickness: 78 mm / 3-3/16" Weight: 180 Kg/m2 (34 Lbs Sq. Ft.)

    Auto-7 is for protection from .30-06- Armor Piercing Rounds. In addition to submitting this Quotation Request. We also require a phone call with our staff: 513-281-6700


    MH: Multi-Hit Situation
    AP: Armor Piercing Round


    Due to the nature of our products and services, we require some information listed below, before we can provide you with a price quotation. We do not provide pricing over the phone.

    Fields marked in red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    *I understand that a phone call is also required from me before a price quotation will be provided

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.
    I understand that a phone call is also required from me before a price quotation will be provided

    Please DO NOT submit a request if you are not serious!
    We also require a phone call from you before a price quotation will be provided.

    28 Aug

    Forced Entry & Physical Attack Resistant Glass: Flat Sheet

    Bullet Resistant Glass

    Bulldog Direct Protective Systems Security Glass Clad Laminates provide long-lasting protection against moderate ballistic and forced entry threats. The durability and versatility of these laminates make them a perfect choice for correctional facilities, court houses, government building and corporate security applications.

    Because spalling – the spray of glass fragments at impact – can be as damaging as the threat the glass stopped, we offer a full line of low-spall and no-spall barriers for many applications. Other levels and systems available! Laser Beam, EMP and Blast Protection. Tinting available at an extra charge. Available in gray, green, bronze and tints.

    Forced Entry & Physical Attack Resistant Glass
    PRODUCTTHREATTHICKNESSLbs./Sq. Ft.
    GCP 375Forced Entry.375″4.0 Lbs.
    GCP 450Forced Entry & .38 Special.450″4.40 Lbs.
    GCP 530Forced Entry & .38 Special.530″4.79 Lbs.
    GCP 600Forced Entry & .38 Special.600″5.18 Lbs.
    GCP 625Forced Entry & .9MM.625″5.28 Lbs.
    GCP 725Forced Entry & .9MM.725″5.96 Lbs.
    GCP 750Forced Entry & 30-Min. Physical Attack 39mm, .357 Magnum Handgun.750″6.06 Lbs.
    GCP 875Forced Entry & 60-Min. Physical Attack .357 Magnum Handgun.875″7.14 Lbs.
    GCP 960Forced Entry & 60-Min. Physical Attack .357 Magnum Handgun.960″7.30 Lbs.
    GCP 1000Forced Entry & 60-Min. Physical Attack .357 Magnum Handgun1.000″9.33 Lbs.
    GCP 1250Forced Entry & 60-Min. Physical Attack .357 Magnum Handgun1.250″10.5 Lbs.

    Ballistic Charts.

    Bulldog Direct’s Forced Entry & Physical Attack Resistant Glass offers you an unparalleled combination of visual clarity and superior attack and ballistic protection, making them the most effective protective glass product available today! We custom fabricate each system to meet your unique specifications and to fit within your budget. Our Flat Glass systems are fabricated using the latest equipment: high-temperature, computerized slumping and forming ovens. In addition, we use high-pressure autoclaves, vacuum assisted cutting and layout tables. All of our glass systems are assembled under atmosphere-controlled clean-room conditions.

    All of our Glass Systems are made in the USA.

     

    Please note: specifications and information listed on this page are subject to change without notice. Price quotations and invoices will list current updated specifications and information, if any.

    Get a Quote



    Sheet Size[s] [In Inches ]

    Height: Width

    [ Use Additional Information box below for multiple sheet sizes ]

    GCP-375 Protection from: Forced Entry & .38 Special Handgun Thickness: .375" Weight: 4.0 lbs.


    GCP-450 Protection from: Forced Entry & .38 Special Handgun Thickness: .450" Weight: 4.40 lbs.


    GCP-530 Protection from: Forced Entry & .38 Special Handgun Thickness: .530" Weight: 4.79 lbs.


    GCP-600 Protection from: Forced Entry & .38 Special Handgun Thickness: .600" Weight: 5.18 lbs.


    GCP-600 Protection from: Forced Entry & .38 Special Handgun Thickness: .600" Weight: 5.18 lbs.


    GCP-625 Protection from: Forced Entry & .9mm Handgun Thickness: .625" Weight: 5.28 lbs.


    GCP-725 Protection from: Forced Entry & .9mm Handgun Thickness: .725" Weight: 5.96 lbs.


    GCP-750 Protection from: Forced Entry & 30-Min. Physical Attack .9 mm, .357 Magnum Handgun Thickness: .750" Weight: 6.06 lbs.


    GCP-875 Protection from: Forced Entry & 60-Min. Physical Attack .9 mm, .357 Magnum Handgun Thickness: .875" Weight: 7.14 lbs.


    GCP-960 Protection from: Forced Entry & 60-Min. Physical Attack .9 mm, .357 Magnum Handgun Thickness: .960" Weight: 7.30 lbs.


    GCP-1000 Protection from: Forced Entry & 60-Min. Physical Attack .9 mm, .357 Magnum Handgun Thickness: 1.000" Weight: 9.33 lbs.


    GCP-1250 Protection from: Forced Entry & 60-Min. Physical Attack .9 mm, .357 Magnum Handgun Thickness: 1.250" Weight: 10.5 lbs.


    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, no P.O. Boxes, or rural routes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    28 Aug

    Flat Sheet Bullet Resistant Glass FAQ

    bullet resistant glass and bullet resistant frames for use in various application James Bond movies and television shows have made “Bulletproof Glass” a household name. It has become a mysterious enigma, so to speak. We will try and dispel the mystery and misinformation about bulletproof glass.

    In the real world, “bullet proof” does not exist. When speaking in terms of protection from hand guns and rifles the proper term is bullet resistant, as nothing is truly bulletproof. If given enough time and effort, any bullet resistant product can be defeated.

    Bullet resistant glass is not at all like it has been portrayed. In movies and TV, bullet resistant glass is portrayed as being no thicker or different from “normal” glass. Bullet resistant glass is often assumed to be “bulletproof,” and it is assumed that it just stops bullets with no regards what is being shot at the glass from a small handgun to rockets. On TV, the bullets just bounce off the glass and away you go! The photo below shows the impact of a bullet into real bullet resistant glass. (Note that the bullets are embedded into the glass)

    Bullet Proof Glass shot two times with a high powered rifle

    Bullet resistant glass is manufactured in different protection levels: from level 2, stopping handguns such as .9mm & .357 Magnums at .825″ thick, to our Level 8- Armor Piercing Protection from a .30-06 Rifle at 2.27″ thick. As the level of protection increases, so does the weight, thickness and price.

    Let’s start by explaining what bullet resistant glass is in the first place:Illustration for how our bullet resistant automotive glass is laid up, photos shows the different layers of glass Bulldog Direct’s Bullet Resistant Glass Is Available In Several Versions:
    U.L. Listed | All Glass | Glass – Clad Polycarbonate

    In – Low -Spall and No -Spall Configurations:
    Low Spall: (Glass on the protected side)
    No-Spall : (Polycarbonate on the protected side)

    What are your three types of bullet resistant glass? 

    We provide three different types of Flat Sheet Bullet Resistant Glass:

    1: U.L. Listed Flat Sheet Bullet Resistant Glass, tested by H.P. White Laboratories Inc., offers you an affordable bullet resistant glass system when Underwriters Laboratories [U.L.] listing and testing is required. This is the most costly of our three Bullet Resistant Glass Systems.

    2: Our All Glass Flat Sheet Bullet Resistant Glass, tested by H.P. White Laboratories Inc., is a very economical Bullet Resistant Glass System. Our All-Glass is the least exspensive of our three systems. It is also the thickest and heaviest of our three Bullet Resistant Glass Systems.

    3: Our Glass-Clad Polycarbonate Flat Sheet Bullet Resistant Glass Tested By: H.P. White Laboratories Inc. is a very economical Bullet Resistant Glass System. It is also the Lightest and Thinnest of all of our 3 Bullet Resistant Glass Systems.This is an extremely durable and light-weight transparent armor , Combining the hard surface of glass with the resilient toughness of poloycarbonate, Our Glass Clad systems are specially designed to defeat threats from high-powered firearms with low-spall or no-spall performance. Mid price level of our 3 Glass Systems.

    Our Glass-Clad Polycarbonate:

    Bullet Resistant Glass in a glass-clad polycarbonate make-up is a multi-ply composite laminate combing polycarbonate and glass using special polyurethane high adhesion bonding interlayers which allow for the expansion/contraction differential of both materials. This special interlayer and the manufacturing process are key elements in controlling the 10:1 thermal expansion ratio. This design allows us significant latitude to almost any ballistic threat from .9mm handguns to .30-06 armor piercing rounds. Combining the the obvious advantages of glass and polycarbonate provides three primary benefits over ALL-Glass composites. #1= Thickness and weight savings up to 60% over conventional ALL-Glass systems. #2= Multiple impact protection and high ballistic protection from rifles. #3= The high structural integrity of polycarbonate with the abrasion, chemical, flame resistance of glass.

    Polycarbonate is plastic material thirty times stronger than acrylic, which is seventeen times stronger than an equal thickness of single strength glass. Polycarbonate, therefore, is an excellent impact barrier and is used as the core material of our bullet resistant composite. Polycarbonate is susceptible to abrasion, scratching, chemical attack, heat and flame. Polycarbonate alone is not an effective ballistics barrier above handgun protection. Our solution is a combination of these materials to take advantage of their benefits while eliminating their individual shortcomings.

    Bulldog Direct’s Bullet Resistant Glass provides ballistic protection that is designed to defeat National Institute of justice [N.I.J.] and Underwriters Laboratories [U.L.] threat levels.

    What Level of Protection Do I Need? 

    Most ballistic attacks in the USA occur using handguns, the most popular being a .9mm or .357 Magnum handgun. In other parts of the world, the weapons of choice is the AK-47 assault rifle. In South America, the ballistic threat could be a .9mm handgun to an M-16 assault rifle. Bad guys tend to shoot at what they can see. Rarely are weapons shot at walls, car doors, etc., other than your occasional drive-by shooting.

    Threat assessment is the first step in deciding which protection level you need. 

    1: Very High Threat Level: You have been shot, or shot at. You or your business has been robbed. Any government buildings, military installations, guard booths, nuclear power plants, etc. Your Bullet Resistant Glass needs are very serious and you need to purchase immediately.

    2: High Threat Level: You have been threatened, stalked, or own a liquor, jewelry or check cashing store. You may live in an area subject to gang violence or drive-by shootings. Your Bullet Resistant Glass needs are serious and real. You need to evaluate your threat and purchase Bullet Resistant Glass within 30-90 days.

    3: Medium-Low Threat Level: You are building a “Safe Room”, you have never been shot, or shot at. Your needs are proactive. You are evaluating your threat and purchasing bullet resistant glass may be a consideration.

    Can anyone purchase Bullet Resistant Glass?

    Purchasing and installing Bullet Resistant Glass Systems in the USA is perfectly legal. No police or government permit is required. We do suggest contacting your local building/fire inspector with regards to building codes, inspections or permits needed.

    Can Bullet Resistant Glass made to any size?

    Bullet Resistant Glass can be custom manufactured to most sizes. However, it is important to keep in mind when considering the purchase of Bullet Resistant Glass that with size, comes weight. In most cases our Bullet Resistant Glass is used to replace glass from an existing window. Most of the units we sell are under 4’x8′. Large Bullet Resistant Glass units over this size are very heavy, thus shipping, boxing and safe installation are more difficult. Please feel free to call us with any questions or special requests you may have at 513-281-6700.

    Bullet Resistant Glass offers protection from forced entry, for use in applications , such as prisons and police stations and court houses

    Question: Is Bullet Resistant Glass Expensive? 

     

    Answer: Most individuals have never been in the market for Bullet Resistant Glass and have nothing to base a price quotation on, other than what they feel the price should be. An informed consumer is always in a better position to make a decision with the proper knowledge and information. Pricing for Bullet Resistant Flat Glass can start from around $25.00 per sq.ft. to over $100.00 per sq.ft. (Depending on sheet size and level of protection needed.)

    How our Glass-Clad Polycarbonate Bullet Resistant Glass is Manufactured

    bullet proof glass manufacturing process showing clean room and autoclave

    Layout and Cutting: The first step in the manufacturing process is cutting all of the needed window units from flat sheet glass stock, along with the sheets of polycarbonate and polyurethane bonding interlayers. The first layer of of glass is cut to the exact size of measurements. The next layer is the first of several of polyurethane bonding interlayers. The next set of glass is cut as described above. The final “lay-up” can be from 2-5 units of glass and 1-2 layers of polycarbonate. The protected side of your Bullet Resistant Glass can be manufactured for you in two ways: Low Spall: Glass on the protected side / No-Spall : Polycarbonate on the protected side.

    bullet resistant glass manufacturing process showing clean room and autoclave

    Clean Room Assembly: All the individual units are then completely cleaned. We now take the cleaned “lay-up” to our cleanroom for final assembly. There, all the glass and the layers of polyurethane bonding interlayers are assembled in the proper configuration. Then, we thoroughly inspect the final assembly for proper size, and for defects in the manufacturing process. Our General Manager, Shop Foreman, and Production Manager must all check off on the final assembly before it is sent to the autoclave for final bonding of the unit.

    Vacuum Bag Assembly: After passing our very stringent inspection, the full “lay-up” is then inserted into a vacuum bag and sealed. We then pull a vacuum on the bag, removing all of the air.

    Autoclaving: The final step in manufacture is loading the vacuum bagged assembly in to one of our two large autoclaves. (These are just a slightly larger version of what your local dentist uses to sterilize their instruments.) The heat and pressure of the autoclave bonds all of layers of polyurethane, glass, and bonding interlayers together. The autoclave cycle takes 12 hours to bond the vacuum bagged assembly into the finished product. It also takes about 8 hours for proper cooldown time.

    Final Inspection & Boxing: After the finished Bullet Resistant Glass has been removed from the autoclave, it is rechecked against the drawings and specifications. Again our General Manager, Shop Foreman, and Production Manager must all check off on the final assembly before it is boxed for shipment to you.

    Bulldog Direct’s Bullet Resistant Vehicle Glass Systems provide Ballistic Protection that is designed to defeat National Institute of Justice [ N.I.J.] and Underwriters Laboratories [ U.L.] threat levels.

    Tested By: H.P. White Laboratories Inc.

    Return to Flat Bullet Resistant Glass Page

    28 Aug

    Flat Sheet Glass

    We have three different Bullet Resistant Glass / Bullet Proof Glass systems.

    curved_bullet_glass

    1. U.L. Listed lay up for those customers needing a U.L. rated Bullet Resistant Glass system.
    2. “ALL” Glass Bullet Resistant Glass system for our customer needing a low cost product.
    3. Glass-Clad Polycarbonate lay up for our customers needing a thinner lighter weight system.

    For over 22 years our Bullet Resistant Glass Systems have offered our customers an unparalleled combination of visual clarity and superior attack and ballistic protection We can custom-develop systems for a variety of ballistic, forced-entry and impact-resistant applications, including automobiles, aircraft, boats, prisons, guardhouses, courthouses, law enforcement facilitates and retail stores. Have a special need, or need on site consultation we can help. All of our glass systems are made in the USA.

    Also see our Forced Entry and Physical Attack Glass Page

    Read More

    28 Aug

    Police Vehicle Armor Kits

    Armored Police Car KitsArmored TruckWe now offer a new line of Vehicle Armored Kits for police, law enforcement and government agencies. These armored police car kits primarily offer protection for the front doors, as for the most part the front doors are used as ballistic shields in a felony stop or shooting situation.

    These door kits provide two levels of protection, the first being handgun protection up to .44 magnum [NIJ Level IIIA] and the second being [NIJ Level III]  protection for most assault rifles.

    Our armored police car kits consist of light weight armor panels for the doors, Kevlar or Dyneema depending on the protection level required and bullet resistant glass for the doors. The armor panels are cut and ready to install in the lower door, with instructions. Our Curved Bullet Resistant vehicle glass is a direct replacement for the OEM side door glass making for easy installation and as an option a front windshield.

    Priced and Sold  as a complete kit only.

    We can provide kits for the following vehicles: 

    Dodge ChargerChevrolet Tahoe
    Ford Crown VictoriaChevrolet Trailblazer
    Ford Pickup TrucksChevrolet Pickup Trucks
    Chevrolet SuburbanCustom Vehicles / Applications
    We have other products available for police, law enforcement and government agencies, including replacement bullet resistant vehicle glass, armor panels, and run flat tire inserts.

    Some of our police customers include:

    Plymouth Township PoliceCobb County Police Department SWAT Team
    Central Police Supply Houston, TexasSt. Bernard Parish Sheriffs Department
    Broadmoor PoliceCollier County Sheriff’s Office
    Canby Police DepartmentMerced California Police Department
    Putnam Co. Sheriff Dept.Dayton Ohio Police Department
    Los Angeles County Sheriff’s DepartmentSharonville Ohio Police Department
    Idaho County Sheriffs OfficeCity of Amarillo Police Department
    Georgia Bureau Of Investigation HRT Team Denver CO Police Department
    Lake Country Buildings and Grounds Department

     Please note: specifications and information listed on this page are subject to change without notice. 

    RESTRICTED SALES:  Direct  Sales To: USA  Police / Government , Military Agencies  ONLYNot for sale to the general public.

     

    Our Police Door Armor Kits are only Priced and Sold  as a complete kit only.
    Quotation requests asking for individual components will not be responded to!

    Please see the following pages for individual components
    Dyneema Armor Panels 
    Kevlar Armor Panels
    Curved Bullet Resistant Vehicle Glass

    If you are NOT  a Direct Member of  a U.S. Police Department, U.S. Military, or U.S. Government Agency, Please Do Not submit a quotation request, as we will not respond to it!

    Get a Quote



    Restricted Sales and pricing to Police, Government,and Military ONLY! NO pricing or sales to the general public!

    If you have a special requirement that not listed below please contact us.



    SUVPick-Up TruckCargo VanPassenger VanOther


    2dr4dr

    Curved Bullet Resistant Vehicle Glass


    Handgun Protection NIJ Level IIIAAssault Rifle Protection NIJ Level III

    Floor Fragmentation / Bomb Blanket ProtectionBullet Resistant Vehicle BatteryFlex-Pro Armor Panels for Roof

    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, NO P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (Email address this is where your quote will be sent)
    (MUST be an official .gov., .org, .mil address)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    28 Aug

    Personal Vehicle Armor Kits

    Road Rage PackageVehicle Armor Kits: For Handgun Protection Only!
    Not everyone needs or can afford a fully armored vehicle. For our customers who only need protection from most handgun threats up to a .44 magnum handgun, we have developed vehicle armor kits for such applications. Our Vehicle Armor Kits consists of the following: A full set of our Curved Bullet Resistant Vehicle Glass to replace all of your vehicle’s existing glass. Flexible Kevlar Vehicle Armor Panels for all the side doors, rear quarter panels and rear of the vehicle. Finally, a set of our Run Flat Tire Inserts to make sure that you can keep moving even if all of your vehicles tires are shot out. Our Vehicle Armor Kits comes in two levels of protection: the first is a NIJ level II kit for protection from handguns such as .22, .38, .9mm, and .357 magnum. The second level of protection is a NIJ level IIIA kit that offers the added protection for handguns up to .44 magnum.

    We provide several types of kits for vehicle protection, starting with our low cost Road Rage Protection Package for protection against “Smash & Grab” crime, physical assaults, attempted kidnappings and other such attacks. This system offers a level of protection that would be adequate for most everyday drivers and is priced accordingly!

    For customers needing a higher level of protection, there is the  Vehicle Armor Kit that provides handgun protection from .9 MM, .357, and .44 Magnum handguns and lesser threats. We do not offer Vehicle Armor Kits for Assault Rifle Protection. These kits are designed for most passenger vehicles or SUVs. Each Armor Kit comes with installation instructions, and can be shipped direct to your door. These kits have many advantages: low cost, lightweight, easy to install, and offers people seeking to armor their own vehicle a one stop source for the needed products.

    For a price quotation, please fill out the ” Quotation Request Form” below, and we also require a phone call from you before we can provide you with a price quotation: 513-281-6700 M-F 9:AM to 5:PM: EST; USA

    Our  Vehicle Armor Kits consist of the following:

    1. Flex-Pro Armor Panels, for all doors and side walls. [Thermoformable] Flex-Pro Armor composites are readily cut and fabricated using commonly available tools a [saber saw with a knife blade will easily cut the panels] the cut panels can then be installed in a vehicle using glue, rivets, screws, or nuts & bolts with washers. Butt joints are ballistically weak; reinforce them with a min. 4″ wide strip of the same level of armor to cover any gaps in the panels.
    2. A Full set of Curved Bullet Resistant Vehicle Glass, please note that our vehicle glass is not just Flat Sheet Bullet Resistant Glass that goes behind your existing glass, BUT is replaced with our Curved Glass that matches your original vehicles glass. Finished vehicle will look stock!. Some modifications are needed to make the side door glass operable.
    3. A Set of (4) Run Flat Tire Inserts: Drive a min. of 30 miles at 30 mph with all 4 of your tires flat. Protection from: road debris, potholes, air leaks, to ballistics.
    4. Installation Instructions.

    Vehicle Kit Options:
    Vehicle Floor Fragmentation / Bomb Blanket Protection
    Flex-Pro 50″x 41″ Armor Panels for roof, engine compartment, or other areas.

    Each Vehicle Armor Kit comes with installation instructions, and can be shipped direct to your door.

    Vehicle Armor Kits have many advantages: low cost, lightweight, easy to install. They offer fleet vehicle users, armored vehicle builders and others seeking to armor their own vehicles a one-stop source for these products.

    Another consideration for our Vehicle Armor Kits is that some countries have prohibited the importation of armored passenger vehicles or add exorbitant import duties or taxes, some as high as 70% of the vehicle cost! Pricing is from around $14,000.00 and up depending on the vehicle and level of protection. Some vehicles may cost more.

    Please note: specifications and information listed on this page are subject to change without notice.


     Pricing and sales for 2014 to 2024  year vehicles years only! Sorry, No exceptions !

    Our Vehicle Armor Kits are priced and sold as a complete kit only 
    Consisting of: A full set of Curved Bullet Resistant Vehicle Glass,Kevlar Armor Panels for the side doors and a set of Run Flat Tire Inserts

     

    A few things to consider before requesting a price quotation:
    Pricing starts at around $14,000. for a small sized vehicle @ NIJ Level II.
    *Modifications are needed to the vehicle door for the glass installation.
    *Is your vehicle a good fit to install our Vehicle Armor Kit?

    Please Note: Some vehicles are not well suited for the installation of our Vehicle Armor Kits, such as small compact cars: Any Tesla Models, Chevrolet Camaro, Corvette, Ford Mustang, BMW Mini Cooper, Etc. and or any convertible top vehicle.

    *Vehicles that are well suited for our Vehicle Armor Kits are: Chevrolet Suburban, Toyota Landcruiser, Pick Up Trucks or other such heavy duty 4 wheel drive vehicles.We may not be able to provide a price quotation for all requests.

     

    In addition to submitting the below Quotation Request Form!

     

    We also require a phone call from you before a price quotation will be provided.

    513-281-6700 M-F 9:AM To -5:PM: EST: USA

    Get a Quote


    Curved Bullet Resistant Vehicle Glass, Flex-Pro Vehicle Armor Panels and a set of Run Flat Tire Inserts


    28 Aug

    Road Rage Protection Package

    Road Rage PackageWith a Road Rage Protected Vehicle:
    You can drive a minimum of 30 miles with 4 flat tires. Take repeated blows to window glass with no entry into the vehicle! Protection from small powered handgun rounds for the glassdoors, and tires, and we won’t kill your pocketbook!

    Road Rage | Auto -Theft | Drive-by Shootings | Random Acts of Violence

    Most people don’t need an armored vehicle with two inch-thick Bullet Resistant Glass, bomb proof floors, roof, or 1/2″ steel armor plate in the doors. Full vehicle armoring can add 2-3 thousand extra pounds of weight to your existing vehicle, at a cost starting at around $75,000.00.

    Bulldog Direct has designed a vehicle protection package that we call our Road Rage Protection Package. We take the best parts of an armored vehicle: protection of the glassdoors, and tires. 13mm LTA Vehicle Glass to replace all of your side door glass, Kevlar Armor Panels for the side doors, and a set of our Run Flat Tire Inserts. This system offers a level of protection that would be adequate for most everyday drivers and is priced accordingly! Pricing starts at around $6,500.00. Bulldog Direct’s Road Rage Protection Package only adds about 100 pounds added weight to your existing vehicle.

    Bulldog Direct’s Road Rage Protection Package has been seen on numerous TV programs, in Newsweek Magazine, Smithsonian Magazine, Cincinnati Magazine to name a few.

    Standard “Road Rage Protection Package©:
    LTA 13mm Glass for all Side Doors, Vents, & Qtrs.
    One set of Run Flat Tire Inserts (4) rims.
    NIJ Level II Flexible Armor Panels for Side Doors.

    Due to the lamination process of bonding to OEM Vehicle Glass:
    Windshields and Rear Windows  are not available as an LTA product!

    Please note: specifications and information listed on this page are subject to change without notice.


    Pricing and sales for 2015 to 2024 year vehicles years only!Sorry, No exceptions! And PLEASE Serious Requests only!

    We will not respond to pricing requests outside of 2015 to 2024 year vehicles

     

    Get a Quote


    Add priced and sold as a complete package only, consisting of LTA 13 MM glass, armor panels and run flat tire inserts.


    SUVPick-Up TruckCargo VanPassenger VanOther


    4 dr2 dr

    (ie. 235/70R/16)


    14"15"16"17"17.5"18"19.5"20"22.5"


    Due to the nature of our products and services, we require some information listed below, before we can provide you with a price quotation. We do not provide pricing over the phone.

    Fields marked in red (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    Please DO NOT submit a request if you are not serious about a purchase!

    28 Aug

    Road Rage Protection Package

    Road Rage PackageWith a Road Rage Protected Vehicle:
    You can drive a minimum of 30 miles with 4 flat tires. Take repeated blows to window glass with no entry into the vehicle! Protection from small powered handgun rounds for the glassdoors, and tires, and we won’t kill your pocketbook!

    Road Rage | Auto -Theft | Drive-by Shootings | Random Acts of Violence

    Most people don’t need an armored vehicle with two inch-thick Bullet Resistant Glass, bomb proof floors, roof, or 1/2″ steel armor plate in the doors. Full vehicle armoring can add 2-3 thousand extra pounds of weight to your existing vehicle, at a cost starting at around $75,000.00.

    Bulldog Direct has designed a vehicle protection package that we call our Road Rage Protection Package. We take the best parts of an armored vehicle: protection of the glassdoors, and tires. 13mm LTA Vehicle Glass to replace all of your side door glass, Kevlar Armor Panels for the side doors, and a set of our Run Flat Tire Inserts. This system offers a level of protection that would be adequate for most everyday drivers and is priced accordingly! Pricing starts at around $6,500.00. Bulldog Direct’s Road Rage Protection Package only adds about 100 pounds added weight to your existing vehicle.

    Bulldog Direct’s Road Rage Protection Package has been seen on numerous TV programs, in Newsweek Magazine, Smithsonian Magazine, Cincinnati Magazine to name a few.

    Standard “Road Rage Protection Package©:
    LTA 13mm Glass for all Side Doors, Vents, & Qtrs.
    One set of Run Flat Tire Inserts (4) rims.
    NIJ Level II Flexible Armor Panels for Side Doors.

    Due to the lamination process of bonding to OEM Vehicle Glass:
    Windshields and Rear Windows  are not available as an LTA product!

    Please note: specifications and information listed on this page are subject to change without notice.


    Pricing and sales for 2015 to 2024 year vehicles years only!Sorry, No exceptions! And PLEASE Serious Requests only!

    We will not respond to pricing requests outside of 2015 to 2024 year vehicles

     

    Get a Quote


    Add priced and sold as a complete package only, consisting of LTA 13 MM glass, armor panels and run flat tire inserts.


    SUVPick-Up TruckCargo VanPassenger VanOther


    4 dr2 dr

    (ie. 235/70R/16)


    14"15"16"17"17.5"18"19.5"20"22.5"


    Due to the nature of our products and services, we require some information listed below, before we can provide you with a price quotation. We do not provide pricing over the phone.

    Fields marked in red (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, No P.O. Boxes)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.

    Please DO NOT submit a request if you are not serious about a purchase!