Dyneema 50"x63" Vehicle Armor Panels are the strongest, lightest, composite ballistic
material made today!Dyneema isn't a woven fabric like most ballistic
materials i.e. [ Kevlar] used today! But instead, a thin,flexible ballistic
composite made from two layers of unidirectional fibers held in place by
flexible resins. These fibers are arranged so they cross each other at 0
and 90 degree angles, then, both fiber and resin layers are sealed between
two thin sheets of polyethylene film similar to sarran wrap.We can also provide Dyneema in other sizes . Ballistic Protection up to NIJ Level III+
Due to Dyneema's lightweight and waterproof design, some ideal armor applications are: Vehicle armoring, helicopters, aircraft, and marine use such as boats, ships, border patrol - homeland security vessels. We can custom fabricate our Dyneema Ballistic Panels to your exact specifications . We have state of the art water capabilities, send use your CAD files and we will do the rest. We can custom manufacturer kits for boats, ships,vehicles or other such applications.
Dyneema composite armor panels are readily cut and fabricated
using commonly available tools [saber saw with a knife blade will easily
cut the panels.] The panels can then be glued in place, or installed with
screws, nuts and bolts, etc. Butt joints are ballistically weak, reinforce
them with a min. 4" wide strip of same level of material to cover any gaps
in the panels.
Our Dyneema armor panels were tested behind .040 aluminum
panels, go to next higher level of protection for stand alone applications.
Request Pricing
|
